PILARISASI BENTONIT DENGAN MODIFIKASI PENAMBAHAN ASAM SULFAT SEBAGAI KATALIS ASAM PADAT DALAM ESTERIFIKASI
DOI:
https://doi.org/10.5614/jtki.2005.4.1.1Keywords:
Bentonite, Pillarization, Acid Treatment, Solid Acid, Esterification, ActivityAbstract
Â
Preparations of pillared bentonites have been carried out using refined bentonite from Trenggalek, East Java, Indonesia as raw materials. Modification cations of pillarization method has been accomplished by the introduction of treatment in acid solution at various stages of pillarization procedure, specifically (i) prior to ion-exchange, (ii) subsequent to ion-exchange, (iii) subsequent to drying of ion-exchanged bentonite and (iv) subsequent to calcination of ion-exchanged bentonite. The resulted modified clays were characterized by X-ray diffraction spectrometry, N2-adsorption, TG/DT Analysis and SEM. Shifts of pore distributions to the Larger pore size by the introduction of acid treatment on the pillarization procedure were observed, which are also accompanied by appropriate increase in specific surface area. Treatment in acidic solution may have resulted in removal of exchangeable cations, which lightened AL-polycation intercalation during the pillarization. The modified clays were tested in an esterification reaction model using stearic acid and ethanol as reaction partners. Activity tests showed that enhancement in physco-chemical characteristics such as specific surface area, pore size and pore distribution, was not generally followed by the increase of the activity.
Â
Key Words: Bentonite, Pillarization, Acid Treatment, Solid Acid, Esterification, Activity.
Â
References
Chen, S., (1999), "From Layer Compounds to Catalytic Materials", Catalysis Today, 49, hal.303-3 12
Narayanan, S., Deshpande, K., (2000), "Alumina Pillared Montmorillonite: Characterization and Catalysis of Toluene Benzylation and Aniline Ethylationâ€, Appl. Catal.A. General 193, hal. 1727
Occelli, M L., Bertrand, J. A., Gould, S. A. C., Dominguez, J. M., (2000), "Physico-chemical Characterization of a Texas Montmorillonite Pillared with Polyoxo-cations of Aluminum Part I: The Microporous Structure", Micropor. Mesopor. Mater. 34, hal. 195-206
Trombetta, M, Busca, B., Lenarda, M, Storaro, L., Ganzerla, R., Piovesan, L., Lopez, A. J., Alcantara-Rodriguez, M, Rodriguez-Castell6n, E., (2000), "Solid Acid Catalysts from Clays: Evaluation of Surface Acidity of Mono- and Bi-pillared Smectites by FT-IR Spectroscopy Measurements, NH3-TPD and Catalytic Tests," Appl. Catal. A: Genera! 193, hal. 5569
Tatsumi, N., Katayama, T., Tabata, O., Mimura T., Fukuoka, N., Yamamoto, K., (2003), “Process for Producing Lower Alkyl Fatty Estersâ€, US Patent Nr: 6,509, 497
Vaccari, A., (1998), “Prereparation and Catalytic Properties of Cationic and Anionic Claysâ€, Catal. Today 41, hal. 53-71
T. Lei, J.S. Xu, Y. Tang, W.M. Hua, Z. Gao. (2000), “New Solid Superacid Catalysts for N-butane Isomerization: g-Al2O3. or Si02 Supported Sulfated Zirconiaâ€, Appl. Catal. A. General 192, hal. 181188
J. Ahenach, P. Cool, E.F. Vansant (1998), “Acid/Base Treatment of Al-PILC in KCI Solutionâ€, Micropor. and Mesopor. Mater. 26, hal. 185192
Mendioroz S., (1993), "Preparation of Thermalstable Pilllared CIay", in New Frontiers in Catalysis, Guezi, L. et. al.(eds), Elsevier Science Publisher, Belgium
CD Rmpp Chemic LexikonVersion I.O (1995), Stuttgart/New York: Georg Thieme Verlag